Instructions on how to pack lights when transporting houses

CÔNG TY TNHH HAI LÚA MOVING

Hotline:

0909 567 996

News & Events

Instructions on how to pack lights when transporting houses
Lights are usually not the first thing you think of when moving many other bulky objects out of the house. But in reality, this item causes a number of problems: fragile, many parts, and has special shapes. In this article we have put together a simple guide on how to pack a lamp to make it easier for you to transport it.

First step

Lamps are often made up of many parts. So before you pack, you'll need to take your lights apart.

Start by pulling your light off the wall. Wind each coil and fix it with a lanyard or rubber strap. Then gently remove the bulbs and set them aside. Once the bulbs are off, you can remove the bulbs. At this point, you can wind the coil onto the lamp base, as long as you've fastened it.

If you have screws that attach shade to the base, place them in a small plastic bag and stick a label on it so you can easily find them later.

How to pack the bulb

Pack your bulbs first, as you don't want those bulbs rolling back and forth while you're packing other things. Carry out the package of the bulb as follows.

Carefully wrap each bulb in a plastic cushion and have air. Fix the gasket with tape so it doesn't come off when the bulb is packed in the box.

Prepare a box with several dedicated compartments that you'll use to seal up in your kitchen. Wrap each bulb in an air-filled plastic cushion and then pack them into compartments, one in each slot.

Add an air-filled plastic cushion at the top before sealing the box. Label your bulb containers so you or your carrier know to be more careful with them.

A word of warning: incandescent bulbs cannot be shipped, as they are filled with mercury, which is toxic if spilled. If you have any incandescent bulbs, you'll have to dispose of them properly and buy new bulbs when you get to the next home.

Handling the lampshade

After removing the bulbs, we will treat the lampshade by wrapping each lampshade in packaging paper. This is very important when using packaging paper that makes sure nothing is printed on it, because it is easy to get dirty.

Each lampshade must be individually packed in an individually-sized box. You can however nest a small section inside a larger lampshade, as long as the two are fitted up to fit together.

Fill the gaps around the lampshades with extra packing paper, air-filled plastic cushions, or even dishcloths or socks with anything soft that will prevent them from moving.

Handling the lamp base

Finally, the lamp base. Wrap each sole in wrapping paper, adding an air-filled plastic wrap if the sole is made of a sensitive material like glass or porcelain. If you use a plastic cushion, protect it with tape.

Unlike the lampshade part, you can probably pack multiple stands in one box. Just make sure not to put anything on the top of the light such as harp lights, fins, switches, and stand base; that is, the area where you turn the bulb and attach the shade to prevent any metal bending.

How to package the floor lamp

Follow the same steps as above to wrap and pack the bulb and lampshade for the floor lamp. However, since their size doesn't fit in just one box, you'll need to have a ton of packing plan.

Floor lamp base made of fragile material should be wrapped in an airtight plastic wrap and transported with care. Be careful not to put anything heavy on the base in the truck though. If possible, separate them from other items.

A few tips when packing lights

1. Measure your lights before buying the box.

When choosing the right size boxes for your lights, it will ensure the safest. Measure the stand and lampshades before buying boxes to avoid stuffing that can cause warping.

2. Mark the shipping label

Number your light boxes, using the same number on the box that contains the lamp base or other types of bulb parts. That way, you will easily find and reassemble your light-piece components when you unpack.

3. Remove the goods as soon as possible

Quickly ship and install your lights as soon as they arrive in your new home. Bulbs are especially susceptible to warping if they are not packed correctly. Hopefully you should have no problems packing the lights, especially if you followed the steps above.

Other post

What days should be avoided when moving into a new home

What days should be avoided when moving into a new home

Moving house should be avoided in a day that we need to pay attention to because according to the custom of her grandparents,
Common difficulties when moving offices

Common difficulties when moving offices

With the office, business owners often want a feng shui business address to bring the best working efficiency.
Notes when moving offices need to understand

Notes when moving offices need to understand

Moving office is always one of the very important things. That is why it is very necessary to pay attention to when moving offices
HAI LUA MOVING CO., LTD

 112/2 Tran Van Kieu, Ward 10, District 6, HCM City

 0909 567 996

 info@hailuamoving.com

 www.hailuamoving.com

Receive news
Facebook Twitter Skype    32344 Online : 3
© Copyright 2020 HAI LUA MOVING - Designed by Viet Wave