Note when using wood furniture paint

1. Paint preservation method

• Hot weather
• It's raining, it's cold
• Ambient humidity
• Wind
• Dust

2. The influence of the environment on paint

There are 5 main environmental factors affecting paint film:

– In sunny and hot weather conditions, the solvent evaporates quickly, making the paint film not stretch and smooth.

In cold and rainy weather, high humidity causes water vapor in the air to splash on the paint film, causing the paint film to turn white.

Wind and dust factors also make the paint film not glossy and smooth.

3. The method of using wood furniture paint

The method of applying paint is an important factor affecting the quality of the paint film. There are many cases of careful surface preparation, good paint and paint tools, but because of not mastering the painting technique, the paint film is also easily damaged: such as the paint film is not glossy, smooth, peeled, cracked, crow's feet... so When using paint, pay attention to the following points:

1. Product surface preparation: the product surface must be cleaned of dust, grease and other impurities, the product must be dry.
2. Choose the time to paint: should be painted on sunny days, during the day should avoid painting on rainy and foggy days.
3. Choose a painting location: paint should be painted in a place where there is a dust-free paint room to avoid natural winds blowing in.
4. Choose a paint type: depending on the requirements of each product, choose the appropriate type of paint
5. Choose painting methods and tools: depending on the type and texture of the product, choose a reasonable painting method and tool
6. Paint in progress.

4. Notes when spraying wood furniture

1. Paint mixture before being put into use must be stirred well.
2. Must mix the correct proportions of the supplier.
3. Avoid using different paint systems and solvent systems.
4. The painting process must follow the supplier's procedures.
5. When the final sanding is applied, it must be painted immediately to avoid the overnight case.
6. When the primer is done, wait for the paint to dry completely before applying the topcoat.
7. Paint mixture should not be left longer than six hours.