Things to keep in mind when cleaning building glass

Building glass cleaning is a fairly complex service, requiring the professionalism, safety, and care of the people who perform this job. Building glass cleaning not only has a cleaning effect, but it also increases the durability of the glass and its resistance to nature better.

1. When should building glass be cleaned?

Usually building glass is cleaned periodically, about 1-2 times / year. For commercial centers or offices, this cleaning can be more than 2 times / year for the best protection of the glass surface, minimizing oxidation and yellow stains, glue stains, paints. loss of aesthetics. However, this cleaning also depends on the actual situation of the glass surface.

Building glass is usually at the end of the year or at the end of the rainy season. This is a dry period, the cleaning is done smoothly, easily and with the highest efficiency.

2. The process of cleaning the building glass.

2.1. Prepare to clean the building's glass.

• The cleaning service provider announces the glass area to perform cleaning on a specific date or period so that the implementation is safe for those around you.
• Arranging the toilet area with necessary items such as signs, notices ...
• Assemble equipment and machines and check safety before service.
• Perform other necessary preparations.

2.2. Clean the raw part

• Scrape away any paint, glue or silicon stains that are stuck on the frame and glass
• Use specialized chemicals to clean stubborn stains. These chemicals must be mixed with the correct ratio, have a clear origin and guaranteed to comply with the correct technique.

2.3. Cleaning glasses, glass frames.

• Chemical mixing to clean the glass and glass frame in a precise ratio.
• Use paint brushes, towels and chemicals to remove dust from the glass frame.
• Use cleaning solution to wet the glass.
• Glass flap
• Wipe corners and door slots with a dry cloth
• The cleaning is usually in a top-down order.

2.4. Clean up

• Remove and clean machinery, scaffolding, tarpaulins and other specialized equipment.
• Wipe all of the above devices then return to the original position.
• Finish the process of cleaning, acceptance and hand-over of the project.

3. Things to be especially careful of when cleaning the building glass

• Employees performing work are required to have an overhead occupational safety certificate to ensure expertise, skills and safety.
• Fully equipped with protective equipment and tools during the work process. This is a dangerous job and always has the potential to directly threaten your life. Therefore, workers should be fully equipped with tools and equipment such as: swing ladders, racks, helmets, glasses, boots ... Make sure that these tools and equipment are carefully assembled and safe. absolute absolute.
• Clean the glass according to the correct process to ensure the stain does not spread, it must be done from high to low and slide the glass according to the glass.
• Install signs before cleaning the building glass so that people who live, work or just pass through here know, to minimize possible problems.